ETC Unison Paradigm ACP Configuration Manual v2.1.2 - Manual (Page 30)

25 Paradigm Architectural Control Processor Configuration Manual
DMX Input
Selecting the active input port displays DMX data sorted
by the input address. The next column displays the level
information for the addresses in the far left column.
When there is no active DMX input, the input level
column displays “---”. Levels are displayed in values 0 -
100. The current DMX level updates about every 250ms.
The next column displays any related local DMX output
that has been patched and lists port A or port B and its level information. When there is not
a relationship or patch for a given input address, “---” displays for level and any applicable
output address data.
The last column of information displays “A” or “N” or “AN”. The “A” indicates the DMX
address is patched to an architectural control, which may also be recorded into presets. The
“N” indicates that DMX address is patched to one or more network sACN outputs and is
providing sACN control from DMX.
Use the touch wheel to scroll through all channels in the list or use the alpha-numeric button
pad to specify a channel. To exit the About DMX Level Data menu and return to the
previous menu press the back button ( ).
DMX Output
Selecting the active output port displays DMX data
sorted by the output addresses in the far left column. The
next column displays the level information for the
address. When there is no active DMX output, the output
level column displays “---”. Levels are displayed in
values 0 - 100.
The current DMX level updates about every 250ms.
The next column displays any related local DMX input which has been patched and lists
port A or port B and its level information. When there is not a relationship or patch for a
given output address, “---” displays for level and any applicable input address data.
The last column of information displays “A” or “N” or “AN”. The “A” indicates the DMX
address is patched to an architectural control, which also affects level information. The “N”
indicates that DMX address is patched to an external sACN control.
DMX level data displays only when there is an active DMX input to the system. When no
DMX input is active “---” is displayed in the level column to indicate no level information is
available.
Use the touch wheel to scroll through all addresses in the list or use the alpha-numeric
button pad to specify an address. To exit the About DMX Level Data menu and return to
the previous menu press the back button ( ).
A: Input DMX Data
In Lvl Out Lvl
127 --- B:127 100
AN
128 50 B:128 100 A
129 50 B:192 50 N
130 0 B:--- --- AN
131 --- B:--- ---
132 99
B:512 99
Out Lvl In Lvl
127 100 A:127 100 AN
128 50 A:128 100 A
129 50 A:192 50 N
130 0 A:--- --- AN
131 15 A:--- ---
132 99 A:512 99
B: Output DMX Data