ETC Unison Paradigm 18-inch Touchscreen Wall Mount Kit - Manual

E T C
®
I n s t a l l a t i o n G u i d e
Paradigm 18" Touchscreen Wall Mount Kit
Paradigm 18" Touchscreen Wall Mount Kit Installation Guide Page 1 of 4 Electronic Theatre Controls, Inc.
Corporate Headquarters  3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA  Tel +608 831 4116  Fax +608 836 1736
London, UK  Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK  Tel +44 (0)20 8896 1000  Fax +44 (0)20 8896 2000
Rome, IT  Via Pieve Torina, 48, 00156 Rome, Italy  Tel +39 (06) 32 111 683  Fax +44 (0) 20 8752 8486
Holzkirchen, DE

Ohmstrasse 3, 83607 Holzkirchen, Germany

Tel +49 (80 24) 47 00-0

Fax +49 (80 24) 47 00-3 00
Hong Kong  Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong  Tel +852 2799 1220  Fax +852 2799 9325
Service: (Americas) [email protected]

(UK) [email protected]

(DE) [email protected]

(Asia) [email protected]
Web: www.etcconnect.com  Copyright © 2013 ETC. All Rights Reserved.  Product information and specifications subject to change.
7184M2210  Rev A  Released 2013-01  ETC intends this document to be provided in its entirety.
Overview
The Paradigm 18” Touchscreen Wall Mount kit (P-TS18-WM) provides the ability to wall mount the
Paradigm 18” Touchscreen.
Installation
Backbox Installation
Prepare the rough opening for backbox installation. ETC recommends
installing the backbox at a height of approximately 36”, providing best line
of sight interface to the installed touchscreen.
The wall mount backbox is provided with conduit knockouts on the top,
bottom and both sides for access to the power input (left side) and data
(right side) terminations. Four screw holes are provided on the left and
right sides of the box for securing it to studs. The backbox is provided with
a flange which should be flush to the installation surface.
The P-TS18-WM wall mounting kit includes a recessed
backbox, touchscreen mounting bracket, RJ45 punch down
Ethernet connector, two foot Ethernet extension cable, and a
terminal block for AC input termination.
9.4 "
9.2 "
3.4 "