ETC Unison Paradigm ACP Configuration Manual v2.1.2 - Manual (Page 51)

3
Programming 46
Step 2: Use the touch wheel to scroll to “Click Wheel” and press enter ( ) repeatedly
to cycle through the options “Low”, “Hi”, or “Off”.
Step 3: When the desired value is displayed, use the touch wheel to scroll to the next
setup option or press back ( ) to return to the “Arch Setup” menu.
Inactivity Time
Inactivity time is the specified amount of time after which the user interface times out to the
status display. The inactivity time is also the backlight timer (when backlight is set to Auto)
and the number navigation timer for any unfinished number navigations. Time setting
options include “Never”, “30secs”, “1min”, “5min”, and “15min”. Default is set to “1min”. If
the inactivity timer is set to “Never”, the backlight will time out after one minute.
A wake event (any button press) wakes the main menu and backlighting. Any touch wheel
use wakes the status display and backlighting.
Step 1: Use the touch wheel to scroll to “Preferences” from within the “Arch Setup” menu
and press enter (
). The Preferences menu list displays.
Step 2: Use the touch wheel to scroll to “Inactivity Time” and press enter ( ) repeatedly
to cycle through the options.
Step 3: When the desired value is displayed, use the touch wheel to scroll to the next
setup option or press back ( ) to return to the “Arch Setup” menu.
Backlight
The backlight setting specifies the performance of the user interface backlight. When the
backlight setting is set to “Auto”, the inactivity timer is also the backlight timer. If the
inactivity timer is set to “Never”, the backlight will time out after one minute.
Backlight settings include:
•
“Auto” (LCD dims when the inactivity timer has expired)
• “On (the backlight is always on)
• “Off” (the backlight is always off).
Step 1: Use the touch wheel to scroll to “Preferences” from within the “Arch Setup” menu
and press enter (
). The Preferences menu list displays.
Step 2: Use the touch wheel to scroll to “Backlight” and press enter ( ) repeatedly to
cycle through the options.
Step 3: When the desired value is displayed, use the touch wheel to scroll to the next
setup option or press back ( ) to return to the “Arch Setup” menu.
Language
The multi-language user interface includes English, Spanish, German and French.
Step 1: Use the touch wheel to scroll to “Preferences” from within the “Arch Setup” menu
and press enter (
). The Preferences menu list displays.
Step 2: Use the touch wheel to scroll to “Language” and press enter ( ) repeatedly to
cycle through the options.
Step 3: When the desired value is displayed, use the touch wheel to scroll to the next
setup option, or press back ( ) to return to the “Arch Setup” menu.