ETC Unison Paradigm 18-inch Touchscreen Setup and Connect Guide - Manual

E T C
®
S e t u p a n d C o n n e c t G u i d e
Paradigm
®
18 inch Touchscreen
Paradigm 18 inch Touchscreen Setup and Connect Guide Page 1 of 12 Electronic Theatre Controls, Inc.
Corporate Headquarters  3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA  Tel +608 831 4116  Fax +608 836 1736
London, UK  Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK  Tel +44 (0)20 8896 1000  Fax +44 (0)20 8896 2000
Rome, IT  Via Pieve Torina, 48, 00156 Rome, Italy  Tel +39 (06) 32 111 683  Fax +44 (0) 20 8752 8486
Holzkirchen, DE

Ohmstrasse 3, 83607 Holzkirchen, Germany

Tel +49 (80 24) 47 00-0

Fax +49 (80 24) 47 00-3 00
Hong Kong  Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong  Tel +852 2799 1220  Fax +852 2799 9325
Service: (Americas) [email protected]

(UK) [email protected]

(DE) [email protected]

(Asia) [email protected]
Web: www.etcconnect.com  Copyright © 2012 ETC. All Rights Reserved.  Product information and specifications subject to change.
7184M2200  Rev A  Released 2012-05  ETC intends this document to be provided in its entirety.
Overview
Welcome to the Paradigm ® 18 inch Touchscreen Setup and Connect Guide. The Paradigm ® 18 inch
Touchscreen P-TS18 ships standard with a table top stand and an international power supply. Available
separately, ETC offers a 19” rack mounting kit (P-TS18-RM) and a recessed wall mounting kit
(P-TS18WM). Contact ETC for ordering details.
This guide provides instructions related to the initial setup and connection of the Paradigm 18 inch
Touchscreen P-TS18 including details to interface with the Application Shell. Instructions for use of the
Paradigm Virtual Touchscreen (P-VTS) software are available on the ETC website at http://
www.etcconnect.com/downloads.aspx.
Features
• 100-240 VAC, 50/60Hz
• High-resolution 1366x768p touchscreen interface
• two USB interfaces which allow for separate mouse and keyboard if required
• Ethernet port connectivity to the Paradigm network
• Uses Paradigm Virtual Touchscreen (P-VTS) software
• includes table top stand mounting hardware
Operating Environment
• supports use of 0-50°C, 10-95% non-condensing humidity environment
N o t e : Reference page 2 of this document for instructions to install the table top stand to the
Touchscreen. Installation instructions for the rack mounting or wall mounting the
Touchscreen are provided with the related kits.
P-TS18 installed on
table top stand
(included)
P-TS18 installed into a
19” rack mount kit
(P-TS18-RM) available
separately
P-TS18 installed
into a wall
mount kit
(P-TS18-WM)
available
separately