ETC Unison DRd Semi-Recessed Installation Kit - Manual

E T C
®
I n s t a l l a t i o n G u i d e
Unison
®
DRd Semi-Recessed Installation Kit
DRd Semi-Recessed Installation Kit Installation Guide Page 1 of 8 Electronic Theatre Controls, Inc.
Corporate Headquarters  3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA  Tel +608 831 4116  Fax +608 836 1736
London, UK  Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK  Tel +44 (0)20 8896 1000  Fax +44 (0)20 8896 2000
Rome, IT  Via Pieve Torina, 48, 00156 Rome, Italy  Tel +39 (06) 32 111 683  Fax +44 (0) 20 8752 8486
Holzkirchen, DE

Ohmstrasse 3, 83607 Holzkirchen, Germany

Tel +49 (80 24) 47 00-0

Fax +49 (80 24) 47 00-3 00
Hong Kong  Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong  Tel +852 2799 1220  Fax +852 2799 9325
Service: (Americas) [email protected]

(UK) [email protected]

(DE) [email protected]

(Asia) [email protected]
Web: www.etcconnect.com  Copyright © 2012 ETC. All Rights Reserved.  Product information and specifications subject to change.
7183M2120  Rev A  Released 2012-02  ETC intends this document to be provided in its entirety.
Using this Guide
This document is intended to guide you through the installation of the DRd Semi-Recessed installation
kit. Reference the Unison DRd Rack Enclosure Installation Manual for instructions that are specific to
the installation of the DRd rack including conduit entry, wire specification and termination, installing rack
options, checking the rack installation, sealing air leaks, etc.
Return to this guide to finish up the installation including setting the fan speed switch on the dimming
engine, re-attaching the DRd rack door, and attaching the cover.
Overview
The Unison DRd Semi-Recessed installation kit provides the ability to partially recess a Unison DRd
rack enclosure into a wall.
Two kits are available:
Each kit ships with the following:
• rough-in enclosure with extension rails attached (rails are removable as needed)
• cover
• hardware including:
• 4 each 5/16 nuts and washers to attach the DRd rack
• 8 each 10-32 screws to attach the cover
• this installation guide
Model Part Number Description
DRd6-RIK 7183K1003 DRd 6 Semi-Recessed Installation kit
DRd12-RIK 7183K1002 DRd 12 Semi-Recessed Installation kit
Rough-in enclosure
The enclosure installs into the cavity of a wall and
secures directly to 2”x4” or 2”x6” construction.
The installation depth of the rough-in determines
how much the DRd rack will extend from the
finished surface.
Openings are provided on the rough-in enclosure,
matching the top and bottom acceptable wire
access for the DRd enclosure, allowing for
convenient conduit access and wire routing.
Extension rails (removable)
Extension rails are provided to extend the enclosure (up
to additional 2.5 inches) flush to the finished wall surface
(as required) for cover attachment. These rails can be
easily removed when they are not required.
Cover
The cover is provided to fit securely to the rough-in
enclosure or extension rails as needed. When the DRd rack
enclosure is installed with a Unison Battery Pack (UBPO), a
knockout is provided in the cover for removal as needed.