Save arch configuration, N o t e – ETC Unison Paradigm ACP Configuration Manual v2.1.2 User Manual
Page 64
59
Paradigm Architectural Control Processor Configuration Manual
Save Arch Configuration
The “Save Arch Config” process saves only the architectural configuration to the root
directory of the removable media device.
Step 1:
Install a removable media device (either SD media card or USB flash drive) into
the correct slot on the front of the ACP. You may have both media types installed
at the same time if desired.
Step 2:
Scroll to “Save Arch Config” from within the “File Operations” menu and press
enter (
). The “Save Arch Config” menu list displays. The filename defaults to
the name of the currently running configuration.
Step 3:
To change the architectural configuration filename press enter (
). The “Save
Filename” menu list displays for selection. You may choose from a selection of
configuration filenames.
Step 4:
Press enter (
) to accept the filename selection. The display returns to the
“Save Arch Config” menu.
Step 5:
Beneath the configuration filename lists the installed and available removable
media. If both media types are installed both are listed, otherwise only the
installed and valid type is available for selection. Scroll to select the desired or
available media type and press enter (
) to save the architectural configuration.
As the configuration file is saving, any errors will stop the save process. If an error
has stopped the saving process, simply follow the instructions on the display.
When the configuration file is saved successfully, the “File Operations” menu
displays.
W A R N I N G :
Do not remove media during this process. Doing so could damage your
media or prevent your system from operating properly.
N o t e :
When the removable media is either not
installed properly or is not an approved type,
you will receive a display notification.
Check the media to ensure it is the proper type.
Reference
press enter (
) to continue.
1 Save Rack Configs
2 Save Dimming Config
3 Load Dimming Config
4 Save Arch Config
5 Load Arch Config
6 Restore Defaults
7 Update Firmware
8 Save LCD Files
9 Save Log Files
File Operations
Paradigm_cfg1
Paradigm_cfg2
Paradigm_cfg3
Paradigm_cfg4
Paradigm_cfg5
Paradigm_cfg6
Paradigm_cfg7
Save Filename
Save Arch Config
Name:
Paradigm_cfg1
Save to USB Media
Save to SD Media
Save Arch Config
Name:
Paradigm_cfg1
Save to USB Media
Save to SD Media
Save Filename
Paradigm_cfg1
Paradigm_cfg2
Paradigm_cfg3
Paradigm_cfg4
Paradigm_cfg5
Paradigm_cfg6
Paradigm_cfg7
Save Arch Config
Name:
Paradigm_cfg2
Save to USB Media
Save to SD Media
Cannot Perform Save
SD or USB
Removable Media
was not detected
or is invalid.
Please insert media
and retry.