beautypg.com

Sacn control, Ethernet interface, Lon interface – ETC Unison Paradigm ACP Configuration Manual v2.1.2 User Manual

Page 32: Ethernet interface lon interface

background image

27

Paradigm Architectural Control Processor Configuration Manual

sACN Control

sACN Sources - total number of sACN sources the processor or system must listen to,
by way of its input patch and gateway functionality. This number changes dynamically
during runtime, as several sources may exist for a single universe.

sACN Universes - sACN universes are the total number of sACN universes being used,
both for input and output. The input and output may be the same or different depending
on the system setup.

sACN Addresses - sACN addresses are the total number of patched sACN addresses,
both for input and output. The input and output addresses may be the same or different,
when they are different they are cumulative. For example, when the input patch is 10
addresses and the output patch is 10 different addresses, this is displayed as 20.

Change the sACN statistics displayed from either “System” view, which is default, or a

narrowed “Processor” view.

When viewing by “Processor”, you may narrow statistics even more by selecting a specific

processor from the processors configured in the system.

Ethernet Interface

LON Interface

sACN Control Stats

Totals by:

Processor

for:

Processor 1

sACN Sources:

6

sACN Universes

3

sACN Addresses

499

“sACN Control Stats” provide users a metric for

resource strain caused by Ethernet based control

using sACN and helps to characterize the sACN

environment for a system. sACN control statistics

update every 5 seconds.

Name:

Processor

1

IP:

10.101.10.101

Mask:

255.255.0.0

GWay:

10.101.1.1

Config:

Manual

DHCP Server:

###.###.###.###

DNS Server:

###.###.###.###

Mac

00:11:22:33:44:55

Pkts TX:

#######

Pkts RX:

#######

Late pkts: #####
Collisions: #####
Jabber pkts:

#####

Runt pkts:

#####

Giant pkts:

#####

Ethernet Interface

“Ethernet Interface” menu includes statistics relating to the

Ethernet connectivity to the Paradigm system. Manual, DHCP,

or Link Local IP configuration were determined when the

LightDesigner project configuration was created, using the New

Project Wizard.

The DHCP and DNS Server data displays with the valid IP

address. When no valid IP is available, “None” displays.

LON Interface Stats

Local NID:

####.####.####

Used Domaine:

x, y

Used Subnets:

w, z

Pkts TX:

####

Pkts RX:

####

TX Retries:

####

Collisions: ####
Late Acks:

####

No Acks:

####

RX Error:

####

Buff Overrun:

####

“LON Interface” menu includes statistics related to the LON

network.