ETC Unison Paradigm ACP Configuration Manual v2.1.2 - Manual (Page 66)

61 Paradigm Architectural Control Processor Configuration Manual
Restore Defaults
The “Restore Defaults” operation erases all memories, excluding removable media, and
returns the specified configuration(s) to factory defaults. “Restore Defaults” is prohibited
while emergency is active within a DRd host enclosure.
Step 1: Scroll to select “Restore Defaults” from the “File Operations” menu and press
enter (
). The menu that displays is dependant on the host rack type, either
DRd or ERn.
Step 2: When the Paradigm ACP is hosted in a DRd rack, you may select to restore
defaults to either the “Arch (P-ACP)”, the “Dimming (DRd)”, or “All”. When the
Paradigm ACP is hosted in an ERn rack, “Arch (P-ACP) is the only option. Press
enter (
) to accept the selection.
Step 3: Scroll to select “No” or “Yes” and press enter ( ).
• If “No” is selected, the display returns to the “File Operations” menu.
Pressing the back ( ) button has the same affect as selecting “No”.
• If “Yes” is selected for the selected option, all memories are erased,
excluding removable media, and configurations are restored to factory
defaults.
N o t e : Before proceeding with “Restore Defaults”, save your current architectural and
dimming rack configurations to removable media device so that you can always
revert back if needed.
Restore Defaults
Select settings
to default:
Arch (P-ACP)
Dimming (DRd)
All
Restore Defaults
Arch settings in
Memory will be lost!
Are you Sure?
No
Yes
When hosted by an DRd rack When hosted by an ERn rack
Restore Defaults
All settings in
Memory will be lost!
Are you Sure?
No
Yes
• Before the Paradigm ACP restores the
configuration factory defaults, you are
provided with one last opportunity to
cancel the “Restore Defaults” operation.