beautypg.com

ETC Unison Ridethru Option Kit User Manual

E t c, Unison, Ride thru option kit installation

background image

E T C

®

S e t u p G u i d e

Unison

®

Ride Thru Option Kit Installation

Unison Ride Thru Option Kit Setup Guide

Page 1 of 3

Electronic Theatre Controls, Inc.

Corporate Headquarters

„

3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA

„

Tel +608 831 4116

„

Fax +608 836 1736

London, UK

„

Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK

„

Tel +44 (0)20 8896 1000

„

Fax +44 (0)20 8896 2000

Rome, IT

„

Via Ennio Quirino Visconti, 11, 00193 Rome, Italy

„

Tel +39 (06) 32 111 683

„

Fax +44 (0) 20 8752 8486

Holzkirchen, DE

„

Ohmstrasse 3, 83607 Holzkirchen, Germany

„

Tel +49 (80 24) 47 00-0

„

Fax +49 (80 24) 47 00-3 00

Hong Kong

„

Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong

„

Tel +852 2799 1220

„

Fax +852 2799 9325

Service: (Americas)

[email protected]

„

(UK)

[email protected]

„

(DE)

[email protected]

„

(Asia)

[email protected]

Web:

www.etcconnect.com

„

Copyright © 2008 ETC. All Rights Reserved.

„

Product information and specifications subject to change.

7183M2240

„

Rev A

„

Released 08/2008

Overview

The ride thru option (URTO) kit provides power to the architectural control processor for a minimum of
12 seconds during brief power outages or power drop outs. The ride thru option board fully charges and
is ready for operation within ten minutes of the host rack enclosure being powered.

Install Into the DRd Rack Enclosure

Step 1:

Align the ride thru option board to the mounting studs in the bottom of the DRd rack.

Notice the mounting holes on the option board. Two are open ended slots used to

place the board and the remaining two standard mounting holes are used to secure

the board in place.

Align the open ended slots to the studs located closest to the front of the rack and

rest the other end of the board on the mounting studs.

Step 2:

Secure the board to the two mounting studs with the screws provided.

N o t e :

A single host DRd or ERn rack enclosure supports the use of either the Unison

ride thru option (URTO) or the Unison battery pack option (UBPO), but not both in

the same enclosure.

W A R N I N G :

Risk of Electric Shock! The Unison Ride Thru Option board retains an

electrical charge even when power to the host rack enclosure is off.

2008