ETC Cobalt Family v7.0.0 User Manual

Page 986

Text mode
Original mode

984

[1] [#] [SHIFT] [CHANNEL] [SHIFT] [100%]

If a console is set to work in At Mode, channel selection functions on the remote behave differently.
For example:

Set channels 1 thru 5 to 55%

[1] [SHIFT] [THRU] [5] [SHIFT] [@Level] [5] [5]

Set channels 1 thru 6 at full

[1] [SHIFT] [THRU] [6] [SHIFT] [100%]

Note: When recording from the remote, only levels set from the remote are recorded, not the whole
stage output.

Note: To enable recording from remote, check the setup option "Allow recording from remote"