ETC Cobalt Family v7.0.0 - Manual (Page 868)

866
Master list - Columns & Functions
All of these are explained per content type in Masters - Functions .
Column Input Function
Master The number of this Master, cannot be
edited.
Content Type [MODIFY] Press MODIFY to open a dropdown
with choices of content.
See
Masters - Content
Content [#] [MODIFY] Sets the number # for the content type.
In [#] [MODIFY] Used by START, Flash on time, Use
Master Times and Master links. If only
an In time is set, it will function as an
Out time as well.
Wait [#] [MODIFY] Used by START and Master links. It is
how long the master will stay up before
the Out time fades out.
Out [#] [MODIFY] Used by START and Master links. It is
how fast the master fade out after a Wait
time.
Flash mode [MODIFY] Toggles Flash mode on/off.
Flash level [#] [MODIFY] Sets flash level #
Solo Fade [MODIFY] Toggles Solo mode on/off. See Solo
Mode .
Page Time Shows the Master Page time that affects
all In-Wait-Out times set in %. See
Master Page Times - Page Time.
Mode (5.0) [MODIFY] Set Master Mode Inclusive, Inhibit or
Exclusive. See
Masters - Modes .
NOTE
Times can be set in % or in seconds. This is selected in the Settings Attributes
- you can always toggle this by holding C before pressing MODIFY in the
In/Wait/Out columns.