ETC Cobalt Family v7.0.0 - Manual (Page 815)

813
Please note that some settings will make other settings invalid - for example, if you set a master to
Inhibit, the main function will be inhibit.
Function Function
Mode Inclusive = playback interacts with other playbacks
Inhibit = fader limits the output of the ch's
Exclusive = fader "owns" channel intensities
Exclude Int From Record Excludes intensity from recording.
Master button Default = Select channels in master as group
Start = Toggles fader to full/zero
Flash = Flashes the content
Include intensity Playback will control intensities
Attributes follow fader Not used
Fader type Add = Adds intensities HTP
Solo = Replaces the content of all other masters
Fader: Use time Fader will never fade faster than the fade time
Return to (FCB) Not used
Preset Not used
Active Parameter Lock Not used
Flash button Off = No function
Momentary = Flash when pressed
Latching = Toggles flash off/on
Flash type Add = Adds intensities HTP
Solo = Replaces the content of all other masters
Flash mode Intensity = Intensities only
Flash: Use time Flash will use master time
Flash Level Sets the target level for flash