ETC Cobalt Family v7.0.0 - Manual (Page 498)

496
Channel viewing formats
All channel views have a variety of viewing formats (selected, non-zero etc). The currently selected
format is indicated in the top right corner of each Channel View. To read more about the viewing
formats see
Navigating - Channel views .
You can toggle through these formats by pressing FORMAT repeatedly:
• All channels
• Selected channels
• Selected and non-zero channels
• Selected and captured channels
• Selected and used in play channels* (see NOTE)
• Channel Layout (if there is one defined)
• # FORMAT (select Channel Layout)
You can activate the following of those formats directly by holding FORMAT and pressing a key
• All channels (FORMAT & ALL)
• All non-zero channels (FORMAT & CH)
• Captured channels (FORMAT & CAPTURE)
• Parked channels (FORMAT & PARK)
NOTE
SELECTED AND USED IN PLAY = Shows channels that are recorded in
presets and Groups. If you select previously not recorded channels, they will
be shown in this view. But, when you select this format the next time, a new
scan through all groups and presets will be made and they will disappear
again if they don’t have recorded levels.
Channel View Zoom
Hold FORMAT and use the wheel to Zoom in/out. (You can hold FORMAT (F4) and then right-click
and drag with mouse as well).