ETC Cobalt Family v7.0.0 - Manual (Page 730)

728
• Clear all Selected Dynamics (CLEAR SELECT)
• Delete All running Dynamics (DELETE ALL)
See Dynamics - Stop .
Dynamic Wheels - Size, Rate, Offset & Delay
Wheels 1 and 2 are used to set Size and Rate for Live Dynamics. See Dynamics - Size & Rate .
• Select channels and set values.
• Set numerical values with # and Wheel Key.
Wheels 3 and 4 are used to set Offset and Delay relations. See Dynamics - Relations & Distance .
• Hold the key and use the wheel.
Live Dynamic Effects Display List
All live Dynamic Effects are shown in this list.
• Use the Trackball in Display List mode to select (click) a running dynamic
• Use DELETE DYNAM to delete the currently selected Dynamic from this list
Keep Dynamics In Next Preset
The KEEP DYNAM soft key is used to record a new base position for a running Dynamic Effect. See
Record Keep Dynamics (New Base Value) .
Set Distance In %
The DISTANCE soft key is used to set the Distance % parameter for the selected running Dynamics
directly. See
Dynamics - Relations & Distance .