ETC Cobalt Family v7.0.0 - Manual (Page 805)

803
Flash time and level
Mode Applies to Feedback
Flash: Use time Ch, group, preset,
effect, chase, Sequence Flash functions will use in-wait-out
times
Flash level Ch, group, preset,
effect, palette, chase,
Sequence Target level for flash functions
Disable Flash Keys
The top area of all screens will indicate that flash is disabled by showing the Flash disabled indicator
pictured below.
Hold C/ALT and press FLASH MODE. Repeat to toggle on/off.
The top of the monitor screens will indicate the Flash is Disabled like this