Device control - home positioning – ETC Cobalt Family v7.0.0 User Manual

Page 585

583

Device Control - Home Positioning

The HOME ATTRIB key in the

programming section

allows you to set devices or parts of devices to

their home position. Home positioning of a device means setting all parameters (or part of them) to the
default values defined in the template of this device. Normally this means setting pan and tilt to 50%,
color to white and all other parameters to neutral. (See

Devices - Templates

)

These functions apply to the currently selected channel(s)

Action

Key

Feedback

All attributes

[HOME_ATTRIB]
[HOME_ATTRIB]

All parameters are set to
home

Focus

[HOME_ATTRIB] &
[FOCUS]

Focus parameters are set to
home

Color

[HOME_ATTRIB] &
[COLOR]

Color parameters are set to
home

Beam

[HOME_ATTRIB] &
[BEAM]

Beam parameters are set to
home

Single parameters

[HOME_ATTRIB] &
[Wheel_Key]

Parameter # is set to home

Another way of doing the same thing