ETC Cobalt Family v7.0.0 - Manual (Page 350)

348
Record Directly To A Master
You can record the selected channels, or all channels with an intensity on stage directly to a Master. A
preset will be created automatically if none is specified. If Attribute recording is set to Automatic,
attributes will also be recorded. The time is default set to 100%. See
Presets - Times .
Action Key Feedback
Record selected [RECORD]
& Master Key You will get a popup with
the next free preset
suggested**.
Record selected as... [#] [RECORD]
& Master Key You get the message
"Preset Recorded" in the
status bar.
*If no channels are selected - all channels in A are recorded.
**To separate the number series of Presets in Masters and in the Main Playback the suggested Preset
number (if no number is entered) will be starting at Preset 801. After this the last used number when
recording to this Master will be incremented.
NOTE
For a Master with a Sequence or Chase, a new preset is recorded to that
Sequence or Chase.
For a Preset - all attributes are recorded, except those Masked by the Global
Mask. For a Sequence step attributes are recorded in the same way as the
sequence of the Main Playback.
Record Selected Channels To Any Preset
Record the selected channels, with attributes and dynamics, to a specified Preset. All moving device
attributes for the selected channels will be recorded (not only changed attributes).
Setting Key Feedback
Record selected [CHANNEL] &
[RECORD] You will get a popup where
you confirm recording this
Preset, and can write a text
label.
Record selected to... [#] [CHANNEL] &
[RECORD] You will get a popup where
you confirm recording this
Preset, and can write a text
label.