ETC Cobalt Family v7.0.0 - Manual (Page 1029)

1027
SOFTWARE LABEL: Text from the device manufacturer
RDM Device List Cache
Normally RDM cache is something you don't have to worry about. In some rare situations you may
want to force a re-query.
There is a column that shows cache status. The Cache contains stored information discovered about a
device over RDM and this indicator shows if Cobalt has cached data about a fixture so Cobalt no
longer needs to query about the device structure.
Press MODIFY in this cell to re-query or store the cache (see options below)
Options (press MODIFY to activate)
"Querying device structure..."
- This is a status that a query is going on
"Device structure available. Save to cache?"
- There is a structure, you can save it to cache manually (it is done at shutdown automatically). It will
be loaded at the next restart of Cobalt.
"Using cached device structure. Delete cache?"
- Will delete the cached structure, and allow a re-query. It will be done at the next restart of Cobalt.
"Restart to use cache"
- The cache is now stored and att the next restart Cobalt will start using it automatically.
"Restart to re-query"
- At the next restart of Cobalt, a new query will be performed.
RDM Device Parameter List
The Device Parameter List provides access to the settings of each device that can be seen and
controlled over RDM. This list is only available when there are discovered RDM devices. It is opened
from the RDM Device List by pressing MODIFY in the Parameter cell of the device you wish to