ETC Cobalt Family v7.0.0 - Manual (Page 621)

619
Device Palettes - Record
To record a device palette hold RECORD and press the PALETTE, FOCUS, COLOR or BEAM key
(see below).
• Palettes are stored for the currently selected channel(s).
• To re-record a Palette, store it with the same number again.
• In the recording popup for Palettes there is a Text field to label each Palette. This is displayed
every time the Palette is used.
NOTE
When you record a Palette, it is also activated and will be recorded into the
next Preset.
Each Device or Each Device Type
In the Palette recording popup there is a choice to store the values individually for Each Device, or for
Each Device Type.
• Positions (FOCUS) are best stored for Each Device, since they always are unique for each
Device (channel).
• Color and Beam values are best stored for a Each Device Type, since color and beam
parameter levels are the same for each Device (channel), and can be reused.
NOTE
If several Device Types are selected, the highest selected channel of each type
will be recorded.
An "Each Device Palette" (individual) will override an "Each Device Type
Palette" (General).