ETC Cobalt Family v7.0.0 User Manual

Page 252

250

Cobalt Action Macros

These are the available Cobalt Action Macros. Some have changed from over the years. Please note
that existing Action Macros using the changed commands will not be converted automatically. They
have to be manually updated to work as expected.

Remember the RULES.

Function

Command

Information

Master START

START Mx
<,target> <,time>

Moves Master x to 'target'
percent in 'time' seconds

Master GO

Go Mx <,preset> <,time>

Mx,preset,time. If Preset is 0 or
omitted, a simple GO command
is made, otherwise a GOTO
(preset) is executed. If Time is
set, it will replace sequence
timing.

Playback GO

Go PB <,preset> <,time>

As per Go Mx but in the Main
Playback.

Master PAUSE

Pause Mx

Pause fade on master.

Playback PAUSE

Pause PB

Pause fade on playback.

Run Macro #

Macro x

Executes macro x

Change Page #

Page x<,y>

Selects page x on bank y
(1=lower bank 1-20), (2=upper
bank 21-40).

Relay Status

Relay Groupx
,Relayx,ON/OFF

Sets the status of relay 1-24, in
relay group #. Group 0 is local
to the console.

UDP String
(6.2)

UDP

Sends an UDP string to the port
and IP defined in System
Settings.

Examples

Go M3,100 (Master 3 GOTO Preset 100 in default time)

Go PB,1 (Goto Step 1 in the sequence of the Main Playback)

Relay 1 ,2 ,ON (Set relay 2 in group 1 to ON)