ETC Cobalt Family v7.0.0 - Manual (Page 407)

405
Function Key Feedback
1. Select MastLink column* Arrow keys The column is highlighted
2. Open Master Link List [MODIFY] The Master Link List is
open.
3. Insert a link to Master # [#] [INSERT] Master # is linked, with its
current content, and a target
level of 100%.
*In the Sequences - List .
NOTE
All functions in the Master Link list are the same as in the View Masters list.
The only differing one is Target, which is the level the Master will fade to. To
load a Master for manual operation, set the target level to 0%.
Sequence Step Links - Shortcut
There is a shortcut for inserting a Master Link directly to the current Sequence Step in the Main
Playback.
Function Key Feedback
Insert link [INSERT] &
[Master_Key] Master # is inserted as a
link to the Step in A.
Insert link with target [#] [INSERT] &
[Master_Key] Master # is linked, with its
current content, and a target
level of 100 or 0%
depending on earlier links.