ETC Cobalt Family v7.0.0 - Manual (Page 894)

892
NOTE
If the console is set to operate in At Mode this key has a slightly different syntax. See
Channels -
Command Syntax .
For more information see Set Channel levels .
Keyboard equivalent: [+]
Console Key - A
Opens the channel view for the A field of the Main Playback. The channel control will be connected
to the A field.
• [A] - Opens and selects the A tab.
• [TIME] & [A] - Forces the setting "Times to A"
For more information see Main Playback - Edit Keys .
Keyboard equivalent: [A]
Console Key - ALIGN
This key is used to align device parameters to the one currently selected with NEXT/LAST.
• [ALIGN] & [parameter key] (CYAN, or FOCUS for example) - Aligns these parameters.
For more information see Device Control - Align .
Keyboard equivalent: [Alt] & [A]
Console Key - ALL
The ALL key is used for selecting channels with levels over 0% in different targets.
• [ALL] - Selects all channels with a level over 0% in any channel view.
• [ALL] [ALL] - In the Live view the first press will select all channels over 0% in A, the
second press will select channels in all Master Playbacks as well.
• [ALL] & [PALETTE KEY] - Hold ALL and press a Direct Select key for a palette to select
all channels with an intensity over 0% using that palette.
For more information see Select Channels .
Keyboard equivalent: [SHIFT] & [-]