ETC Cobalt Family v7.0.0 - Manual (Page 185)

183
Crossfade Settings
The Crossfade Settings are general for the Main Playback.
Timing settings
Function Explanation Default
value
Default GO Time The Time used by the GO key when no
times have been assigned to a crossfade 5
Default Go Back Time The Time used by the GO BACK key when
pressed independent of any ongoing fades. 2
Default Out/In Time Causes the specified time(s) to be
automatically recorded into all new
sequence steps, which will be used instead
of the Default GO time.
Playback mode settings
Function Explanation Default
value
Modify Sequence Deactivate all Auto-times, Master Links and
other Autostart items for all Sequences. Off
Build Sequence Presets recorded in LIVE will automatically
added into the Sequence of the A/B
Playback. They will always be stored in the
Preset List On
Crossfade both ways Crossfaders make a crossfade both up and
down (instead of only up). Off
Set times to Times are set directly to the Sequence Step
in the A field, or the B field B
GOTO jumps to GOTO fades to Preset numbers, or
Sequence Step numbers Preset