Lenovo ThinkPad R400 - Manual (Page 185)

v No Preference: Place modules that do not require sequencing in this field in any
order.
v Last: Place modules that need to be installed last in this field in a specified
sequence.
v Check the Insert Driver Map modules after this module check box to determine
the install sequence of when the driver map modules will be installed.
Note: You can only select this check box for Base Map Customer First Boot
modules.
To modify the installation sequence within a base map, do the following:
1. In the Repository window, double-click the appropriate base-map entry. The
Base Map window opens.
2. In the Main window menu bar, click Tools , and then click Install Sequence .
The Install Sequence window opens.
3. Select the type of modules for which you want to set the order. The modules
for the selected type are shown in the Set the install sequence boxes.
4. Click the module entry you want to move, and then use the Move Item Up or
Move Item Down icon in the Map Settings window to move the module
entry to the First , Last , or No preference box.
5. Check the Insert Driver Map modules after this module check box to
determine the install sequence of when the driver map modules will be
installed.
Note: You can only select this check box for Base Map Customer First Boot
modules.
6. Repeat this step for each module you need to move.
7. After all modules have been moved to the appropriate box, use the Move
Item Up or Move Item Down icon in the Map Settings window to set the
order within the First box and the Last box.
Note: When working with partitioning modules, adhere to the following:
v By default, Primary NTFS Partition partitioning modules (Win2000
Primary Partition, WinXP Home Primary Partition, WinXP Pro Primary
Partition, Windows Vista 32 bit Partition Module, or Windows Vista 64 bit
Partition Module) are always installed before their associated I386 base
operating-system modules. In most cases, there is no reason to move
Primary NTFS Partition partitioning modules.
v When working with I386 base operating-system modules,
partitioning modules designed to create or preserve extra partitions
(such as Drive Prep - Delete C Partition only) must be installed before
Primary NTFS Partition partitioning modules (Win2000 Primary
Partition, WinXP Home Primary Partition, WinXP Pro Primary Partition,
Windows Vista 32 bit Partition Module, or Windows Vista 64 bit Partition
Module). Otherwise, the partitioning module might not be installed.
v Partitioning modules designed to create or preserve extra partitions
(such as Drive Prep - Delete C Partition only) must be installed before
any imported ImageUltra-developed base operating-system module
that yields an Ultra-Portable Image; otherwise, the partitioning
module might not be installed.
v When working with multiple partitioning modules, verify that
partitioning modules are installed in the correct order to get the
desired result.
Chapter 9. Specifying the module-installation order 171