Lenovo ThinkPad R400 - Manual (Page 147)

e. In the Parameters field, type any parameters required for the filter. For
information about the parameters used with the filters provided as part of
the ImageUltra Builder program, refer to the ImageUltra Builder help
system.
f. Repeat steps a through e for each filter you want to associate with the menu
item.
g. If you have more than one filter associated with a menu item, do one of the
following:
v If you want the menu item to be displayed only if the conditions set by
all filters are met, place a check mark in the All conditions must be
satisfied check box.
v If you want the menu item displayed if the conditions set by at least one
filter is met, do not place a check mark in the All conditions must be
satisfied check box.
9. When you have finished making the changes, click the Save icon located in the
Main window toolbar; then, close the Menu Item Properties window.
Chapter 7. Creating maps 133