Festo Контроллер крайних положений SPC11 - Manual (Page 94)

4. Commissioning
4-36
Festo P.BE-SPC11-SYS-EN en 1406e
Please note
If, after you have taught the end positions again, the previ-
ously taught intermediate positions (P.03 and P.04) now lie
outside the positioning range, positioning commands to
move to the intermediate positions will be acknowledged
with error E14. As soon as the intermediate positions lie
again in the permitted positioning range by adjustment of
the end stops and teaching again of the end positions,
positioning commands to move to the intermediate posi-
tions will be carried out again.