Festo Контроллер крайних положений SPC11 - Manual (Page 130)

A. Start-up via digital inputs/outputs
A-8
Festo P.BE-SPC11-SYS-EN en 1406e
A.2.3 Teaching the intermediate position time dependency diagram
I5: +/}
I7: {/- 1
0
1
0
Drive is moving
O3/4:
Po.3/4
1
0
1
0
I8: Remote
min. 20 ms
1
0
I6: Enter
min. 2 s
1 2
O5:
Error/Ready
*)
*) Function of the O5 output can be configured (see chapter 4.2.3); Error (factory setting) or Ready
1 Drive moves as long as the
corresponding signal (I5 or I7) is
present 2 Save current position as intermediate
position (switch-on time min. 2 s)
Fig. A/4: Teaching the intermediate position time dependency diagram