Festo Контроллер крайних положений SPC11 - Manual (Page 106)

4. Commissioning
4-48
Festo P.BE-SPC11-SYS-EN en 1406e
Example: Target position = Pos2
1 Drive
(here linear drive
type DGP-...-...)
1
P.01 P.03 P.02
P.01
P.03
P.02
Fig. 4/10: Premature change of direction (example with linear drive)
The output that signals reaching the intermediate position
(here O3) can, if needed, be wired directly to the correspon-
ding input (here I1, for P.01).