Festo Контроллер крайних положений SPC11 - Manual (Page 20)

1. Summary of components
1-6
Festo P.BE-SPC11-SYS-EN en 1406e
Components
In order to implement fast positioning with electronically
closed-loop controlled end position cushioning, you will
require the following components:
– the Soft Stop SPC11
– a proportional directional control valve type MPYE-5-...
– a service unit with a 5 μm filter, without lubricator
– a permitted path measuring system (external or
integrated with the drive)
– a drive, if possible with mechanical guide
– if possible, two fixed stops (depending on the drive used)
– a 24 V DC power supply
– if necessary, components for a pneumatic emergency stop
circuit
– possible components for additional pneumatic circuits
(see chapter 3.2.1).