Festo Контроллер крайних положений SPC11 - Manual (Page 134)

B. Technical appendix
B-4
Festo P.BE-SPC11-SYS-EN en 1406e
Technical specifications Type SPC11-...-...
Path measuring system
input
Type SPC11-POT-...
Type SPC11-MTS-AIF
Type SPC11-INC
Potentiometer
– Supply voltage
– Input voltage
MTS Temposonics
– Supply voltage
– Communication
Incremental path measurement
– Sensor supply
– Sensor signals
+10 V
0...+10 V
24 V
CAN field bus
5 V and GND
Are picked up at 2 magnetic
field sensors
Valve output – Power supply
– Output voltage 24 V (DC)
0...+10 V
CE marking symbol (see conformity declaration)
 www.festo.com as per EU EMC directive
Vibration and shock – Vibration
– Shock
– Tested as per DIN/IEC 68/
EN 60068 part 2-6;
0.35 mm path at 10...60 Hz
5 g acceler. at 60...150 Hz
– Tested as per DIN/IEC 68/
EN 60068 part 2-27;
±30 g at 11 ms duration;
5 shocks per direction
1) The component is intended for industrial use.