Festo Контроллер крайних положений SPC11 - Manual (Page 71)

4. Commissioning
4-13
Festo P.BE-SPC11-SYS-EN en 1406e
Determine value of the o-parameter
Different combinations of options are possible. You determine
the value to be set through addition of the individual decimal
values of the desired options.
Example:
Options Bit Calculation
Use O5 for Ready signal - instead of Error signal 0 + 1
Switch off soft end position behaviour 3 + 8
Use I4 for Stop signal (stop with return
travel) – instead of Move signal 6 + 64
Total (value to be set) = 73
Alternative calculation
Bit no. 6 5 4 3 2 1 0
Bit value 1 0 0 1 0 0 1
Calculation
1 * 2 0 + 1 * 2 3 + 1 * 2 6 = 73