Festo Контроллер крайних положений SPC11 - Manual (Page 78)

4. Commissioning
4-20
Festo P.BE-SPC11-SYS-EN en 1406e
Start:
Switch-on reaction
Display of
system parameters
Display of
amplification stage
Display of
cushioning stage
Wait approx. 1 second
Wait approx. 1 second
Wait approx. 1 second
The SPC11 waits
for a teach order
The t flashes
Firmware version number
The current value is
displayed here
Display of
firmware version
Wait approx. 0.5 second
Display of
drive length (stroke)
*)
Wait approx. 1 second
Display offset
axes zero point
*)
Wait approx. 1 second
Display of
option parameters
Wait approx. 1 second
*) Only when incremental path measuring systems are used
(e.g. positioning drive DNCI-...-... in connection with type
SPC11-INC)
Fig. 4/4: Switch-on behaviour of the SPC11 after
pre-commissioning (in the office)
The teach procedure can be started (see section 4.3.1).