Allied Telesis AT-S39 - Manual (Page 97)

AT-S39 User’s Guide
97
Port-based
Example 1 Figure 24 illustrates an example of one AT-8024 Fast Ethernet Switch
with three port-based VLANs. (For purposes of the following examples,
the Default VLAN is not shown.)
Figure 24 Port-based VLAN - Example 1
The table below lists the port assignments for the Sales, Engineering,
and Production VLANs on the switch.
Each VLAN has been assigned a unique VID. You assign this number
when you create a VLAN.
The ports have been assigned PVID values. A port’s PVID is assigned
automatically by the management software when you create the VLAN.
A PVID is the same as the VID to which the port is an untagged member.
Link
Mode
Link Mode
100 FULL
ACT
MODE
COL FAULT MASTER
PWR
AT-8024
10Base-T / 100Base-TX Fast Ethernet Switch RS-232 TERMINAL PORT
Router
AT-8024 Ethernet Switch
Sales VLAN Production VLAN
(VID 2) (VID 4)
Engineering VLAN
(VID 3)
WAN
Port 4 Port 12 Port 22
Sales VLAN
(VID 2) Engineering VLAN
(VID 3) Production VLAN
(VID 4)
AT-8024 Switch (top) Ports 1 - 4 (PVID 2) Ports 9, 11 - 13 (PVID 3) Ports 21 - 24 (PVID 4)