Allied Telesis AT-S39 - Manual (Page 133)

AT-S39 User’s Guide
133
Viewing MAC Addresses by Port
This section contains the procedure for viewing the dynamic MAC
addresses that have been learned on a particular port. You can also use
this procedure to view any static MAC addresses that have been
assigned to a port.
1. From the Main Menu, type 6 to select MAC Address Table.
2. From the MAC Address Table menu, type 6 to select View MAC
Addresses by Port Menu.
The following prompt is displayed:
Please enter port number -> [1 to 26] ->
3. Enter the number of the port whose static and dynamic MAC
addresses you want to view and press Return.
A window is displayed with the MAC addresses of the nodes on
the port. The columns in the window and the definitions of the
columns are the same as for the Show All MAC Addresses window
on page 131.
The information in this window is for viewing purposes only.