Allied Telesis AT-S39 - Manual (Page 110)

Section II: Local and Telnet Management
110
Example of Creating a Port-based VLAN
The following procedure creates the Sales VLAN illustrated in Port-
based Example 1 on page 97. This VLAN will be assigned a VID of 2 and
will consist of four untagged ports, Ports 1 to 4. The VLAN will not
contain any tagged ports. The VLAN traffic will not be mirrored on
another port, nor will it be sent to the switch’s CPU.
To create the example Sales VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 2 to select Virtual LAN Definitions.
3. From the Virtual LAN Definitions menu, type 1 to select Create a
VLAN.
4. Type 1 to select VLAN Name and enter “Sales”. Press Return.
5. Type 2 to select VLAN ID (VID) and enter “2”. This is the VID value for
the new VLAN.
6. Type 4 to select Untagged Ports and enter “1-4”. These are the
untagged ports of the VLAN.
7. Type C to select Create VLAN.
8. After the switch displays the prompt notifying you that it created the
VLAN, press any key.
9. Type S to select Save Configuration Changes.
The new Sales VLAN has now been created.