beautypg.com

Figure 4: system configuration menu – Allied Telesis AT-S39 User Manual

Page 38

background image

Section II: Local and Telnet Management

38

The System Configuration Menu in Figure 4 is displayed.

Figure 4 System Configuration Menu

2. Type 4 to select BOOTP/DHCP.

The following prompt is displayed:

BOOTP/DHCP (E-Enabled, D-Disabled):

3. Type E to enable BOOTP and DHCP services on the switch or D to

disable the services and press Return. The default is disabled.

4. Type S to select Save Configuration Changes.

5. Reboot the switch using either the management software or the reset

button on the back panel of the switch.

Allied Telesyn AT-8024 Ethernet Switch

System Config Menu

1 - MAC Aging Time ................... 300 seconds
2 - Switch Mode ...................... Tagged
3 - Console Discount Timer Interval .. 10 minute(s)
4 - BOOTP/DHCP........................ Disabled
5 - Web Server Status ................ Enabled
6 - SNMP Access ...................... Enabled

7 - Advanced Configuration
8 - Reset to Factory Defaults

S - Save Configuration Changes
R - Return to Previous Menu

Enter your selection: