Allied Telesis AT-S39 - Manual (Page 190)

Section III: Web Browser Management
190
❑ 100Mbps - Half Duplex
❑ 100Mbps - Full Duplex
Broadcast Storm Control
The maximum number of broadcast packets the port can receive
within a specified period of time. If the threshold is reach, any
additional broadcast packets received on the port are discarded
by the switch. For background information on this feature, refer to
Broadcast Frame Control Overview on page 152. For
instructions on how to set this value, refer to Setting the
Maximum Number of Broadcast Frames on page 237.
Flow Control
The flow control setting for the port. Possible values are:
None - No flow control on the port.
Transmit - Flow control only on packets being transmitted out of
the port.
Receive - Flow control only on packets being received on the port.
Both - Flow control for both packets entering and leaving the port.
MDI/MDIX
The wiring configuration of the port. The default setting of Auto
has the port configure itself automatically as MDI or MDIX,
depending on the end node. You can use this option to configure
a port’s wiring configuration manually.
Note
The Auto setting is not available if you set a port’s speed and duplex
mode manually.
7. Once you have made the desired changes, click Apply.
The switch immediately activates the parameter changes on the
port.