Allied Telesis AT-S39 - Manual (Page 153)

AT-S39 User’s Guide
153
Here’s an example. Let’s assume that you sent the timer interval for 100
Mbps ports to 100 milliseconds and the maximum broadcast frame limit
for a particular 100 Mbps port on the switch to 200 broadcast frames. At
these settings, the port will accept up to 200 broadcast frames every 100
milliseconds. If the maximum is exceeded during the specified time
interval, the broadcast frames over the limit are discarded by the port
and are not forwarded by the switch.
Note
The AT-S39 default setting is no broadcast frame control on the
switch.