Allied Telesis AT-S39 - Manual (Page 121)

AT-S39 User’s Guide
121
The Port VLANS & Priorities window in Figure 34 is displayed.
Figure 34 Port VLANs and Priorities Window
5. Type 2 to select Port VLAN ID.
The following prompt is displayed:
Enter new value -> [1 to 4096] ->
6. Specify the new PVID value for the port. Press Return.
Note
You cannot assign a PVID to a port for a VLAN that does not exist. For
example, if you want to assign a port a PVID of 7, there must be a
VLAN on the switch with a VID of 7.
7. Type U to select Update Changes to Chip.
The switch displays the following prompt:
SUCCESS - Press any key to continue.
8. Return to the Main Menu.
9. Type S to select Save Configuration Changes.
The port now has a new PVID. You can repeat this procedure to assign
new PVIDs to other ports on the switch.
Allied Telesyn AT-8024 Ethernet Switch
Port VLANs & Priorities
1 - Port Number ................... 1
2 - Port VLAN ID .................. 1
3 - Priority (0-7) 0=Low 7=High ... 0
4 - Override Priority (Y/N) ....... N
U - Update Changes
S - Save Configuration Changes
R - Return to Previous Menu
Enter your selection: