Allied Telesis AT-S39 - Manual (Page 77)

AT-S39 User’s Guide
77
Deleting a Port Trunk
Caution
Disconnect the cables from the port trunk on the switch before
performing the following procedure. Deleting a port trunk without
first disconnecting the cables can create loops in your network
topology. Data loops can result in broadcast storms and poor
network performance.
To delete a port trunk from the switch, perform the following procedure:
1. From the Main Menu, type 1 to select Port Menu.
2. From the Port Menu, type 3 to select Port Trunking.
The Port Trunking menu in Figure 20 on page 75 is displayed.
3. Type D to select Delete trunk.
A confirmation prompt is displayed.
4. Type Y for yes to delete the port trunk or N for no to cancel this
procedure.
5. Type S to select Save Configuration Changes.
The port trunk is deleted from the switch.