Allied Telesis AT-S39 - Manual (Page 111)

AT-S39 User’s Guide
111
Example of Creating a Tagged VLAN
The following procedure creates the Engineering VLAN in the top switch
illustrated in Tagged VLAN Example on page 103. This VLAN will be
assigned a VID of 3. It will consist of four untagged ports, Ports 9, 11, 12,
and 20, and two untagged ports, Ports 8 and 16. The VLAN traffic will not
be mirrored on another port, nor will it be sent to the switch’s CPU.
To create the example Engineering VLAN, perform the following
procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 2 to select Virtual LAN Definitions.
3. From the Virtual LAN Definitions menu, type 1 to select Create a
VLAN.
4. Type 1 to select VLAN Name and enter “Engineering”. Press Return.
5. Type 2 to select VLAN ID (VID) and enter “3”. This is the VID value for
the new VLAN.
6. Type 3 to select Tagged Ports and enter “8,16”. These are the tagged
ports of the VLAN.
7. Type 4 to select Untagged Ports and enter “9,10,11, 20”. These are the
untagged ports of the VLAN.
8. Type C to select Create VLAN.
9. After the switch displays the prompt notifying you that it created the
VLAN, press any key.
10. Type S to select Save Configuration Changes.
The new Engineering VLAN has now been created.