Allied Telesis AT-S39 - Manual (Page 117)

AT-S39 User’s Guide
117
Deleting a VLAN
Note
You need to know the VID of the VLAN you want to delete to
perform this procedure. To obtain a VLAN’s VID, refer to the
procedure Displaying VLAN Information on page 116.
To delete a VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 2 to select Virtual LAN Definitions.
3. From the Virtual LAN Definitions menu, type 3 to select Delete a
VLAN.
The Delete a VLAN menu in Figure 32 is displayed.
Figure 32 Delete a VLAN Menu
4. Type 1 to select VLAN ID (VID).
The following prompt is displayed:
Enter new value -> [2 to 4096] ->
5. Enter the VID of the VLAN you want to delete and press Return.
Note
You cannot delete the Default VLAN, which has a VID of 1.
The specifications of the selected VLAN are displayed. Use this
window to confirm that you are deleting the correct VLAN.
Allied Telesyn AT-8024 Ethernet Switch
Delete a VLAN
1 - VLAN ID (VID) ........
R - Return to Previous Menu
Enter your selection: