Allied Telesis AT-S39 - Manual (Page 71)

AT-S39 User’s Guide
71
The dynamic MAC address limits are applied to the ports on the
switch. Limited security has now been configured on the switch.
14. Type 1 to select Display MAC limit per port.
The current MAC address limits for all the ports are displayed.
15. Examine the MAC limits. Check to be sure that they are correct. If you
assigned different values to different ports, be sure that the different
values apply to the correct ports. If necessary, repeat this procedure
to change any MAC address limits.
16. Type R to select Return to the Previous Menu.