Allied Telesis AT-S39 - Manual (Page 212)

Section III: Web Browser Management
212
4. Click Add.
The Add VLAN window in Figure 69 is displayed.
Figure 69 Add VLAN Window
5. Select the Name field and enter a name for the new VLAN.
The name can be from one to 10 characters in length. The name
should reflect the function of the nodes of the VLAN (for example,
Sales or Accounting). The name can contain spaces but not special
characters, such as asterisks (*) or exclamation points (!).
If the VLAN will be unique in your network, the name should be
unique as well. If the VLAN will be part of a larger VLAN that spans
multiple switches, the name for the VLAN should be the same on each
switch where nodes of the VLAN are connected.
Note
A VLAN must be assigned a name.
6. Select the VID field and enter a VID value for the new VLAN. The range
of the VID value is 2 to 4096.
If this will be a unique VLAN in your network, its VID must be unique
as well.If the VLAN will be part of a larger VLAN that spans multiple
switches, its VID value should be the same on each switch. For