Allied Telesis AT-S39 - Manual (Page 167)

AT-S39 User’s Guide
167
The following prompt is displayed:
You are going to invoke the Xmodem download utility.
Do you wish to continue? [Yes/No]
6. Type Y for Yes.
The prompt “Downloading” is displayed.
7. Begin the file transfer of the new management software image.
Note
The transfer protocol must be Xmodem or 1K Xmodem.
Steps 8 through 11 illustrate how you would transfer the file using
the Hilgraeve HyperTerminal program.
8. From the HyperTerminal main window, select the Transfer menu.
Then select Send File from the pull-down menu, as shown in Figure
49.
Figure 49 Local Management Window
The Send File window in Figure 50 is displayed.
Figure 50 Send File Window
9. Click the Browse button and specify the location and file of the
software.