Allied Telesis AT-S39 - Manual (Page 226)

Section III: Web Browser Management
226
Adding Static MAC Addresses
You can assign up to 255 static MAC addresses per port on the switch.
To add a static address to the MAC address table, perform the following
procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 2.
3. From the Layer 2 page, select the MAC Address tab.
The MAC Address window in Figure 72 on page 223 is displayed.
4. In the MAC Address section of the window, enter the new static MAC
address.
5. From the Port pull-down menu, select the port to which you want to
assign the static address.
6. Click Add.
7. Repeat this procedure to add other static addresses to the switch.