Allied Telesis AT-S39 - Manual (Page 150)

Section II: Local and Telnet Management
150
Displaying a List of Multicast Routers
A multicast router is a router that is receiving multicast packets from a
multicast application and transmitting the packets to host nodes. You
can use the AT-S39 software to display a list of the multicast routers that
are connected to the switch.
To display a list of the multicast routers, perform the following
procedure:
1. From the Main Menu, type 5 to select System Config Menu.
2. From the System Configuration Menu, type 7 to select Advanced
Configuration.
3. From the Advanced Configuration window, type 1 to select IGMP
Snooping Configuration.
The IGMP Snooping Configuration window in Figure 40 is
displayed.
4. From the IGMP Snooping Configuration window, type 7 to select
View Multicast Router List.
The View Multicast Router List in Figure 41 is displayed.
Figure 42 View Multicast Routers List Window
The information in this window is for viewing purposes only. The
columns are defined below:
Port
The port on the switch where the multicast router is connected.
VLAN
The VID of the VLAN in which the port is an untagged member.
Router IP
The IP address of the multicast router.
Allied Telesyn AT-8024 Ethernet Switch
View Multicast Router List
Port VLAN Router IP
---------------------------------------------
U - Update Display
R - Return to Previous Menu
Enter your selection: