Allied Telesis AT-S39 - Manual (Page 191)

AT-S39 User’s Guide
191
Displaying Port Status and Statistics
The procedure in this section displays the operating status of the ports
on a switch and port statistics. You can view a port’s operating speed,
duplex mode, MDI/MDI-X configuration, and more. You can also view
the operating status of any GBIC modules installed in an AT-8024GB.
To display the status or statistics of a switch port, perform the following
procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring page, select Layer 1.
The Layer 1 option is shown in Figure 59.
Figure 59 Port Monitoring Page
This page displays a graphical image of the front of the switch.
Ports with valid links to end nodes have a green light.
3. Click a port. You can select more than one port at a time when you
want to display port status. However, you can select only one port
when displaying statistics. A selected port turns white. (To deselect a
port, click it again.)
4. Click Status to display the port’s operating status or Statistics to
display port statistics.