Allied Telesis AT-S39 - Manual (Page 80)

80
Creating a Port Mirror
To create a port mirror, perform the following procedure:
1. From the Main Menu, type 1 to select Port Menu.
2. From the Port Menu, type 2 to select Port Mirroring.
The Port Mirroring menu in Figure 21 is displayed.
Figure 21 Port Trunking Menu
3. Type 1 to select Mirror (Destination) Port.
The following prompt is displayed.
Enter mirror port (0=None) [0 to 24] ->
4. Enter the number of the port to function as the mirror port (that is, the
port to where the traffic will be copied). Press Return.
You can specify only one mirror port.
5. Type 2 to select Mirroring (Source) Port.
The following prompt is displayed.
Enter Mirroring Ports (0=None) [1 to 24] ->
6. Enter the number of the port whose traffic is to be mirrored. To mirror
the traffic of more than one port, enter the ports individually (e.g.,
1,4,6) or as a range (e.g., 11-14)
7. Type S to select Save Configuration Changes.
The port mirror is now functional.
Allied Telesyn AT-8024 Ethernet Switch
Port Mirroring
1 - Mirror (Destination) Port ....... None
2 - Mirroring (Source) Port ......... None
S - Save Configuration Changes
R - Return to Previous Menu
Enter your selection: