Allied Telesis AT-S39 - Manual (Page 166)

Section II: Local and Telnet Management
166
The following menu is displayed:
Figure 48 Xmodem Downloads & Uploads Menu
Note
This version of the management software does not allow you to
upload a configuration file from a workstation to a switch using the
management software. Uploading configuration files is possible
using TFTP, as explained in Uploading a Configuration File on
page 170.
4. Type the appropriate number to select the desired action.
The following prompt is displayed:
Enter filename -
5. Enter one of the following:
❑ To load a new management software image, type ats39.img.
❑ To load a new boot loader file, type ats39.ldr.
❑ To load a configuration file, type ats39.cfg.
Note
Do not enter the drive or directory path where the software image
is stored.
The actual filename of the software image, loader file, or
configuration file to be downloaded onto the switch does not
have to match the corresponding filename above, so long as the
suffix is correct (.img, .ldr, or .cfg).
Allied Telesyn AT-8024 Ethernet Switch
Xmodem Downloads
1 - Xmodem Image Download
2 - Xmodem Config Download
3 - Xmodem Boot Loader Download
R - Return to Previous Menu
Enter your selection: